Data Sheet

3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
SPECIFICATIONS
ORDERING INFORMATION
FEATURES
› Automatic electronic current limiting feature
› Voltage transient protection on all power and signal input/
output lines provides unconditional protection from power
surges and other voltage transient events.
› (14) Fourteen 1-inch rack slots available
› All modules located within the chassis rack are hot-
swappable
› Lifetime Warranty
The design approach employed by ComNet
™
for equipment mounted within
the card cage rack unit (C1-CH) with modular power supply (C1PS), provides for
the elimination of a single-point failure in the event of a major fault within any
module located within the chassis rack. This is accomplished through the use of
automatic electronic current limiting within each rack-mountable module, rather
than providing the current limiting within the power supply unit which supports
the power requirements for equipment located within the rack. In nearly all
competing designs,a major fault within a module, located within the chassis rack,
results in the power supply unit going into a current limiting condition, and as a
result, all of the modules within the rack shut down. The rack design employed
by ComNet eliminates this possibility, as only the faulty module shuts down,
and the operation of the other modules within the rack continue unimpaired.
This automatic current limiting feature is also self-resetting, should the fault or
overload be of a temporary or intermittent condition. Furthermore, all modules
located within the chassis rack are hot-swappable, so that it is not necessary to
power-down the rack when removing or replacing modules.
C1
Rack Mount Card Cage With Power Supply
Electrical
Input Voltage 90-264 VAC @ 70 W Maximum
Output Voltage 9 VDC +/- 5% @ 6.5 Amps @ 75˚C
Fusing 1.25 A slow blow (rack power supply)
Plug-in modules individually electronically fused.
Each power supply unit is individually fused.
Power Indicator Red LED
AC Line Cord Detachable, IEC-connected. Allows easy field
replacement or exchange for various worldwide AC
power plug configurations.
Mechanical
Size (L × W × H)
Rack Mount: 19.0 × 7.5 × 6.9 in. (48.2 × 19 × 17.5 cm)
Rack Slots: (14) 1-inch slots available
Shipping Weight: <5 lbs./2.15 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Heat Generation 240 BTU
AGENCY COMPLIANCE
*
*Power Supply Only
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
Part Number Description
C1-US 19” Rack (US AC Power Cord)
C1-EU 19” Rack (EU & UK Power Cord)
C1-IN 19” Rack (US, EU, UK & AU Power Cord)
C1-CH 19” Rack (no power supply)
C1PS
Spare 90-264 VAC Input Power Supply
(order power cords separately)
Included Accessories 90-264 VAC Input (includes power supply and power cord)
Included with C1-US, C1-EU and C1-IN only
Options C1-BP – Blank Panel (1”)
C1-BP2 – Blank Panel (2”)
C1-BP3 – Blank Panel (3”)
C1-SA – South African Power Cord
C1-AU – Australian Power Cord