Installation Manual

ManualsBrandsComnet Manualstransmission1 Ch Ethernet Over Coax Extender w/Pass-Through PoE

INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 1TECH SUPPORT: 1.888.678.9427

INSTALLATION AND OPERATION MANUAL

CLFE(X)EO(C,U) Series

ETHERNET OVER COPPER EXTENDER

WITH PASS-THROUGH POE TO 15 WATTS

The ComNet CopperLine® Ethernet over copper line supports up to sixteen

channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable

(CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a

PoE switch or the included power supply. Four, eight, and sixteen channel units

operate from local power. These units provide the ultimate flexibility for extending

a powered device (PD) over long distance copper. DIP switches are provided for user-

selection of local or remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.

Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment

operating status. Table 2 on Page 9 describes the LED indicators for each light on

the unit.

The CLFE8EO(C,U) and CLFE16EO(C,U) are 1RU rack mountable units. The

CLFE4EO(C,U) units are interchangeable between stand-alone or card mount

configurations, or may be DIN-rail mounted by the addition of ComNet model

DINBKT1 or DINBKT4 adaptor plate. The CLFE1EO(C,U) units are stand-alone, or

may be DIN-rail mounted by the addition of ComNet model DINBKT4 adaptor. See

Figures A through C on Page 11 for mounting instructions.

This manual serves the following

ComNet Model Numbers:

CLFE1EOC

CLFE4EOC

CLFE8EOC

CLFE16EOC

CLFE1EOU

CLFE4EOU

CLFE8EOU

CLFE16EOU

Summary of content (12 pages)

PAGE 1
INSTALLATION AND OPERATION MANUAL CLFE(X)EO(C,U) Series ETHERNET OVER COPPER EXTENDER WITH PASS-THROUGH POE TO 15 WATTS This manual serves the following ComNet Model Numbers: CLFE1EOC CLFE4EOC CLFE8EOC CLFE16EOC CLFE1EOU CLFE4EOU CLFE8EOU CLFE16EOU The ComNet CopperLine® Ethernet over copper line supports up to sixteen channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over coaxial cable.
PAGE 2
INSTALLATION AND OPERATION MANUAL CLFE(X)EO(C,U) Series FIGURE 1 – CLFE1EOC SINGLE CHANNEL COAX UNIT ETHERNET EXT DISTANCE Black (AC or DC–) Black w/ White Stripe (AC or DC+) Power: O perates on PoE power OR 9 to 36 VDC OR 24 VAC Power Consumption: 1.
PAGE 3
INSTALLATION AND OPERATION MANUAL CLFE(X)EO(C,U) Series FIGURE 3 – CLFE4EOC FOUR CHANNEL SURFACE OR RACK MOUNT COAX UNIT CH1 ETHERNET CH1 EXT DISTANCE CH2 ETHERNET CH2 EXT DISTANCE CH3 ETHERNET CH3 EXT DISTANCE CH4 ETHERNET CH4 EXT DISTANCE Black (DC-) Black w/ White Stripe (DC+) Operating Power: 9 to 15 VDC Power Consumption: 5W FIGURE 4 – CLFE4EOC FOUR CHANNEL SURFACE OR RACK MOUNT COAX UNIT Local/Remote push button See Installation Instructions, Step 3 Local/Remote DIP switch See Install
PAGE 4
INSTALLATION AND OPERATION MANUAL CLFE(X)EO(C,U) Series FIGURE 5 – CLFE4EOU FOUR CHANNEL SURFACE OR RACK MOUNT UTP UNITS CH1 ETHERNET CH1 EXT DISTANCE CH2 ETHERNET CH2 EXT DISTANCE CH3 ETHERNET CH3 EXT DISTANCE CH4 ETHERNET CH4 EXT DISTANCE Black (DC–) Black w/ White Stripe (DC+) Operating Power: 9 to 15 VDC Power Consumption: 5W FIGURE 6 – CLFE4EOU FOUR CHANNEL SURFACE OR RACK MOUNT UTP UNITS Local/Remote DIP switch Data rate DIP switch See Installation Instructions, Step 1 TECH SUPPORT: 1
PAGE 5
CH1 EXT DISTANCE CH2 EXT DISTANCE CH3 EXT DISTANCE CH4 EXT DISTANCE CH5 EXT DISTANCE CH6 EXT DISTANCE CH8 ETHERNET CH7 ETHERNET CH6 ETHERNET CH5 ETHERNET CH4 ETHERNET CH3 ETHERNET CH2 ETHERNET CH1 ETHERNET FIGURE 7 – CLFE8EOC MULTICHANNEL RACK COAX UNITS CH7 EXT DISTANCE CLFE(X)EO(C,U) Series CH8 EXT DISTANCE INSTALLATION AND OPERATION MANUAL Black (DC–) Black w/ White Stripe (DC+) Operating Power: 9 to 15 VDC Power Consumption: 10W CH1 EXT DISTANCE CH2 EXT DISTANCE CH3 EXT DISTANCE
PAGE 6
INSTALLATION AND OPERATION MANUAL CLFE(X)EO(C,U) Series CH1 EXT DISTANCE CH2 EXT DISTANCE CH3 EXT DISTANCE CH4 EXT DISTANCE CH5 EXT DISTANCE CH6 EXT DISTANCE CH7 EXT DISTANCE CH8 EXT DISTANCE CH9 EXT DISTANCE CH10 EXT DISTANCE CH11 EXT DISTANCE CH12 EXT DISTANCE CH13 EXT DISTANCE CH14 EXT DISTANCE CH15 EXT DISTANCE CH16 EXT DISTANCE FIGURE 9 – CLFE16EOC MULTICHANNEL RACK COAX UNITS Data rate DIP switch See Installation Instructions, Step 1 TECH SUPPORT: 1.888.678.
PAGE 7
INSTALLATION AND OPERATION MANUAL CLFE(X)EO(C,U) Series CH1 EXT DISTANCE CH2 EXT DISTANCE CH3 EXT DISTANCE CH4 EXT DISTANCE CH5 EXT DISTANCE CH6 EXT DISTANCE CH7 EXT DISTANCE CH8 EXT DISTANCE CH9 EXT DISTANCE CH10 EXT DISTANCE CH11 EXT DISTANCE CH12 EXT DISTANCE CH13 EXT DISTANCE CH14 EXT DISTANCE CH15 EXT DISTANCE CH16 EXT DISTANCE FIGURE 10 – CLFE16EOU MULTICHANNEL RACK UTP UNITS Black (DC–) Black w/ White Stripe (DC+) CH16 ETHERNET CH15 ETHERNET CH14 ETHERNET CH13 ETHERNET CH12 ET
PAGE 8
INSTALLATION AND OPERATION MANUAL CLFE(X)EO(C,U) Series APPLICATION DIAGRAMS Ethernet Connection Note: Coaxial applications use CLFE(X)EOC modules; UTP applications use CLFE(X)EOU modules.
PAGE 9
INSTALLATION AND OPERATION MANUAL CLFE(X)EO(C,U) Series INSTALLATION INSTRUCTIONS 1 - SET 10/100 SWITCH Locate the 10/100 data rate DIP switch on the unit. Set the data rate according to bandwidth required. NOTE: The data rate must be set the same on both the local and remote units. 2 - SET WIRE PAIR DIP SWITCHES (UTP MODELS ONLY, FOR COAX MODELS SKIP TO STEP 3) Locate the wire pair DIP switch on the unit. Set the pair according to number of twisted wire pairs used (1 or 4).
PAGE 10
INSTALLATION AND OPERATION MANUAL CLFE(X)EO(C,U) Series APPLICATION NOTES 1 Mixed PoE and Non-PoE systems can be implemented. 2 All Non-PoE systems require local power. 3 PoE powered operation requires that a PoE Camera be connected, and that the camera power requirements are understood. 4 Multiple Channel units (CLFE4EO(C,U), CLFE8EO(C,U), CLFE16EO(C,U) require 9 to 15 VDC for proper operation. The CLFE4EO(C,U) can be used in a C1, C2, or C3.
PAGE 11
INSTALLATION AND OPERATION MANUAL CLFE(X)EO(C,U) Series PRODUCT DIMENSIONS The CLFE1EO(C,U) is supplied as a standalone/surface mount (small size) module. The CLFE4EO(C,U) is supplied as a standalone/surface/rack (ComFit) module. The CLFE8EO(C,U) and CLFE16EO(C,U) are supplied as 19″ wide rack units for standalone or rack installation. FIGURE A FIGURE B Dimensions are for a small size module Dimensions are for a ComFit module 0.8cm [0.31in] 0.4cm [0.16in] 4.19cm [1.65in] 0.62cm [0.24in] 13.2cm [5.
PAGE 12
INSTALLATION AND OPERATION MANUAL CLFE(X)EO(C,U) Series INSTALLATION CONSIDERATIONS These units are supplied as Standalone/Rack mounted module. Units should be installed in dry locations protected from extremes of temperature and humidity. WARNING: Unit is to be used with a Listed Class 2 power supply. IMPORTANT SAFEGUARDS: A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient.