Data Sheet

ManualsBrandsComnet ManualsElectronics10/100TX Drop/Insert/Repeat 4TX/2EX Self-Managed

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› 10/100 Mbps Ethernet

• 4 × 10/100Mbps RJ-45 Ports

• 2 × 10/100Mbps UTP/Coax Extended Distance Ports

› Electrical ports support Auto-Negotiation for 10 Mbps

or 100 Mbps, full duplex or half duplex data

› Extended distance ports are switch-selectable for 10 Mbps

or 100 Mbps data rate, 1 pair or 4 pair in UTP mode

› IEEE802.3at PoE+ 30W (PoE models only)

› Automatic MDI/MDI-X crossover

› Full 10/100 Mbps Bandwidth

› Supports Multicast, Unicast

› Designed to meet full compliance with the environmental

requirements (ambient operating temperature, mechanical

shock, vibration, humidity with condensation, high-line/low-

line voltage conditions and transient voltage protection) of

NEMA TS-1/TS-2 and the Caltrans Specification for Traffic

Signal Control Equipment.

› Voltage transient protection on all power and signal input/

output lines provides protection from power surges and other

voltage transient events.

› Extended distance over UTP or Coaxial Cable

› Hot-swappable rack modules

› Interchangeable between stand-alone or rack mount use –

ComFit

› LED status indicators confirm operating status

› IEEE 802.3 compliant

› Lifetime Warranty

APPLICATIONS

› 10/100 Mbps Ethernet

› High Speed Computer Links

› Drop/Insert/Repeat Ethernet data over extended distances

› Factory Automation with UTP

The ComNet CLFE4+2SMS[POE](C,U) is a six-port Ethernet switch with add/

drop/repeat functionality and provides 4 copper ports operating at 10/100Mbps

and is designed to combine four electrical ports along with the incoming Cat5,

UTP or Coax CopperLine® extension port into a further CopperLine extension

port that forwards this data to the next CopperLine network device. There is no

programming required to use this product. The ComNet CLFE4+2SMS(C,U) comes

pre-programmed, preventing network video flooding with DIP switch selection of

the first CopperLine port as an uplink or as an unmanaged switch. Ports 1–4 of the

CLFE4+2SMSPOE(C,U) can supply up to thirty (30) watts of Power over Ethernet

(PoE)* and incorporate PoE+ features based on the IEEE 802.3at standard. It is

“Plug-and-Play”.

CLFE4+2SMS[POE](C,U)

10/100TX Drop/Insert/Repeat 4TX/2EX

Self-Managed Switch with PoE+

30W

4TX+2EX-40˚ TO

75˚ C EXTENDER

* Power Supply for PoE applications is sold separately.

Summary of content (2 pages)

PAGE 1
0/100TX Drop/Insert/Repeat 4TX/2EX Self-Managed Switch with PoE+ CLFE4+2SMS[POE](C,U) -40˚ TO +75˚ C EXTENDER 30W 4TX+2EX The ComNet CLFE4+2SMS[POE](C,U) is a six-port Ethernet switch with add/ drop/repeat functionality and provides 4 copper ports operating at 10/100Mbps and is designed to combine four electrical ports along with the incoming Cat5, UTP or Coax CopperLine® extension port into a further CopperLine extension port that forwards this data to the next CopperLine network device.
PAGE 2
10/100TX Drop/Insert/Repeat 4TX/2EX Self-Managed Switch with PoE+ CLFE4+2SMS[POE](C,U) SPECIFICATIONS Data Electrical & Mechanical Data Interface Ethernet Data Rate 10/100 Mbps IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Ports Indicator LEDs Uplink/Data Activity Electrical Link/Data Activity Power PoE Surface Mount Wall or Flat Surface Screw Attachment Circuit Board Meets IPC Standard Size 6.1 × 5.3 × 2.2 in (15.5 × 13.5 × 5.