Installation Manual

INSTALLATION AND OPERATION MANUAL CLRFE1EOC(E,P)/M SERIES
© 2015 Communication Networks. All Rights Reserved. “ComNet,” the “ComNet Logo,” “CopperLine,”
and the “CopperLine Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
INS_CLRFE1EOCX/M-REV- 12/23/14 PAGE 5
FIGURE A
Dimensions are for a mini size module
COMMUNICATION
NETWORKS
www.comnet.net
3 CORPORATE DRIVE
DANBURY, CT. 06810
TM
INSTALLATION CONSIDERATIONS
The CLRFE1EOC(E,P)/M is supplied as a standalone/surface mount (mini size)
module. Units should be installed in dry locations protected from extremes of
temperature and humidity.
WARNING: Unit is to be used with a Listed Class 2 power supply.
IMPORTANT SAFEGUARDS:
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may
be greater than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the maximum
ambient temperature (T
ma
) specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment in a rack should be such
that the amount of air flow required for safe operation of the equipment is not
compromised.