Installation Manual

INS_CLSETUP_REV–
12/18/11
PAGE 2
CAT5
FIGURE 1 – CLSETUP
FIGURE 2 – CCLSETUP
FIGURE 3 – CLSETUP CONNECTIONS
INSTALLATION AND OPERATION MANUAL CLSETUP
RIGHT PANELLEFT PANEL
TECH SUPPORT: 1.888.678.9427
DIRECTIONS FOR ThE CLSETUP IP CamERa SETUP aND POE TESTER
Refer to Figure 3
• Disconnect the network cable
• Connect pigtail cable to the camera
• Connect network cable to “Network” connector
• Connect “Laptop” connector to your laptop using standard patch cable
• After the camera power is on the CLSETUP will display the PoE voltage applied to the camera
• Open your browser or viewing software to view the camera image for adjustments
PoE Switch
CLSETUP
PoE Camera