Installation Manual

ManualsBrandsComnet ManualsFiber Converter2-Channel 100Mbps Media Converter

INS_CNFE200X[POE] Series_REV– 10/18/14 PAGE 1

INSTALLATION AND OPERATION MANUAL

CNFE200(X)[POE](M,S)(1,2)[HO][/M]

2 CHANNEL 10/100 MBPS ETHERNET

ELECTRICAL TO OPTICAL MEDIA CONVERTER

WITH OPTIONAL POWER OVER ETHERNET (POE+)

The ComNet Ethernet CNFE200(X) media converter series are two-channel Ethernet

electrical to optical media converters with optional PoE+. These auto-negotiating

devices accept two 10/100 Mbps electrical inputs and convert this to a single 100

Mbps optical output. This series of media converters are available as multimode

or single-mode and one and two fiber SC and ST optical connectors. The ComNet

exclusive Demux feature allows for port isolation, replicating two media converters

over one fiber. The ComNet exclusive Mux feature prevents network video flooding

of multicast traffic with DIP switch selection of the fiber port as a dedicated uplink

path. The CNFE200(X) series can be powered by wide range AC or DC input while the

CNFE200(X)POE units meet the 802.3at standard and provide 30 watts of PoE+ power,

with an option for a 60 watt CNFE200(X)POEHO model. The PoE models are powered

by a 48 to 56 volt DC power supply (sold seperately).

LED indicators confirm operational status. All models are environmentally hardened

with no electrical or optical adjustments (Plug and Play). DIP Switches on the outside of

each unit allow for fine-tuning of features. See Figures 1 – 14 for complete operation

details. See Figures A and B for mounting instructions.

Summary of content (7 pages)

PAGE 1
INSTALLATION AND OPERATION MANUAL CNFE200(X)[POE](M,S)(1,2)[HO][/M] 2 CHANNEL 10/100 MBPS ETHERNET ELECTRICAL TO OPTICAL MEDIA CONVERTER WITH OPTIONAL POWER OVER ETHERNET (POE+) The ComNet Ethernet CNFE200(X) media converter series are two-channel Ethernet electrical to optical media converters with optional PoE+. These auto-negotiating devices accept two 10/100 Mbps electrical inputs and convert this to a single 100 Mbps optical output.
PAGE 2
INSTALLATION AND OPERATION MANUAL CNFE200(X)[POE](M,S)(1,2)[HO][/M] FIGURE 1 – Standard Mount DC-Only Media Converter (Non-PoE) Figures on this page apply to the following model numbers: CNFE2002M1A CNFE2002M1B CNFE2002S1A CNFE2002S1B CNFE2003M2 CNFE2003S2 CNFE2004M1A CNFE2004M1B CNFE2004S1A CNFE2004S1B CNFE2005M2 CNFE2005S2 FIGURE 2 – Standard Mount DC-Only Media Converter (Non-PoE) FRONT PANEL REAR PANEL CAT5/6 CAT5/6 Multimode or Single Mode, 1 or 2 Optical Fibers (Model Dependent) DIP Switches (
PAGE 3
INSTALLATION AND OPERATION MANUAL CNFE200(X)[POE](M,S)(1,2)[HO][/M] FIGURE 3 – Mini AC/DC Power Media Converter (Non-PoE) Figures on this page apply to the following model numbers: CNFE2002M1A/M CNFE2002M1B/M CNFE2002S1A/M CNFE2002S1B/M CNFE2003M2/M CNFE2003S2/M CNFE2004M1A/M CNFE2004M1B/M CNFE2004S1A/M CNFE2004S1B/M CNFE2005M2/M CNFE2005S2/M FIGURE 4 – Mini AC/DC Power Media Converter (Non-PoE) FRONT PANEL REAR PANEL Multimode or Single Mode, 1 or 2 Optical Fibers (Model Dependent) CAT5/6 CAT5/6 DI
PAGE 4
INSTALLATION AND OPERATION MANUAL CNFE200(X)[POE](M,S)(1,2)[HO][/M] FIGURE 5 – Mini PoE Media Converter Figures on this page apply to the following model numbers: CNFE2002M1APOE/M CNFE2002M1BPOE/M CNFE2002S1APOE/M CNFE2002S1BPOE/M CNFE2002M1APOEHO/M CNFE2002M1BPOEHO/M CNFE2002S1APOEHO/M CNFE2002S1BPOEHO/M CNFE2003M2POE/M CNFE2003S2POE/M CNFE2003M2POEHO/M CNFE2003S2POEHO/M CNFE2004M1APOE/M CNFE2004M1BPOE/M CNFE2004S1APOE/M CNFE2004S1BPOE/M CNFE2004M1APOEHO/M CNFE2004M1BPOEHO/M FIGURE 6 – Mini PoE Media Co
PAGE 5
INSTALLATION AND OPERATION MANUAL CNFE200(X)[POE](M,S)(1,2)[HO][/M] FIGURE 7 – Indicating LEDs LINK STATUS (See Figures 8 & 9) POE 1 & 2 (PoE models only) POWER ETHERNET LINK/ACTIVITY GREEN Communication link has been established over optical fiber. Flashes when data is being transmitted.
PAGE 6
INSTALLATION AND OPERATION MANUAL FIGURE 11 – MUX Disabled Multicast traffic will be flooded on all ports. CNFE200(X)[POE](M,S)(1,2)[HO][/M] FIGURE 12 – MUX Enabled IGMP is Enabled on the CWGE2FE24MODMS Managed Switch. Multicast traffic is diverted only to the fiber port preventing flooding on the local device.
PAGE 7
MECHANICAL INSTALLATION INSTRUCTIONS INSTALLATION CONSIDERATIONS CAUTION: Take care not to press on any of the LEDs. This fiber-optic link is supplied as Standalone/Surface Mount and Surface Mount/Rack Mount modules. Units should be installed in dry locations protected from extremes of temperature and humidity. 2. Tighten the two thumb screws on the card until the front panel of the card is seated against the front of the rack.