Data Sheet

CNFE200(X)(M,S)(1,2)[POE][HO][/M] Series
2 Channel 10/100 Mbps Ethernet Electrical To Optical
Media Converter with Optional Power over Ethernet (PoE+)
SPECIFICATIONS
Ethernet
Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port/Full Duplex Optical
Port
Connectors
Optical ST or SC, 1 or 2 Fibers
Power Terminal Block
Data RJ45
LED Indicators
- Optical Link/Data Activity - Electrical Link/Data Activity
- Power - Unit Status - PoE Status
Power
Operating Voltage Range Mini non PoE: 8 to 24 VDC or 22 to 27 VAC
Mini PoE: 48 to 56 VDC
Standard: 8 to 24 VDC
Power Consumption 3W (without PoE load)
Fault Relay (Full Size Units Only)
Response Time 25 msec typical
Output Channels 1
Rating 0-36V, 190mA (AC or DC)
PoE Pin Assignment
RJ45 ports support IEEE802.3at
End-point Positive (VCC+): RJ45 pin 1, 2 (RJ45 pin 1,2 and 4,5 on 60W ports)
Negative (VCC-): RJ45 pin 3, 6 (RJ45 pin 3,6 and 7,8 on 60W ports)
Electrical & Mechanical
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (L×W×H) Standard: 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Mini: 4.1 × 3.7 × 1.1 in (10.4 × 9.4 × 2.8 cm)
Shipping Weight: <2 lbs./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)
1
Ethernet Standards
IEEE 802.3 for 10BASE-T
IEEE 802.3u for 100BASE-TX and 100BASE-FX
IEEE 802.3at for Power Sourcing Equipment (PSE) and PoE
[1] May be extended to humidity with condensation conditions by
adding suffix ‘/C’
TYPICAL APPLICATION
Optical Fiber
(Fiber count, mode, distance
and connector type are
model dependent)
E
E
CNFE2002M1B
CNFE2002M1APOE/M
48 to 57 VDC
LEGEND
OPTICAL FIBER
CAT-5 CABLE
PoE POWER
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427