Data Sheet

SPECIFICATIONS
Data
Data Interface: Ethernet
Data Rate: 10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port/ Full
Duplex Optical Port
Contacts
Response Time 25 msec typical, network dependent
Input/Output Channels 2
Inputs Dry Closure
Output Rating 0 – 36V, 190mA (AC or DC)
Connectors
1
Power Terminal Block
Optical LC or SC (SFP dependent)
Ethernet RJ45
Contact Closure Terminal Block
Fibers
1
SFP Dependent
Fiber Connectors: Requires selection of sold-separately SFP
modules. See ComNet data sheet for number
and description of SFP modules.
LED Indicators: - Optical Link/Data Activity - Power
- Loss Of Link - Contacts In/Out
Power
Operating Voltage Range 8 to 24 VDC
CNFE2MC2C/M: 22 to 27 VAC
Power Consumption 8W
Current Draw 320mA
Electrical & Mechanical
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
CNFE2MC2C Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
CNFE2MC2C/M Size 4.1 × 3.7 × 1.1 in (10.4 × 9.5 × 2.8 cm)
Shipping Weight <2 lbs./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)
2
[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651.
Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
CNFE2MC2C[/M]
10/100Mbps Ethernet Electrical to Optical
Media Converter with Contact Closures
Fiber count and type
are SFP dependent
E
C
E
C
CNFE2MC2C/M
CNFE2MC2C/M
1
2
1
2
TYPICAL APPLICATION
ORDERING INFORMATION
Part Number Description Maximum Distance
CNFE2MC2C/M Small Size 10/100 Mbps Ethernet Media Converter See SFP Modules data sheet for optional distances, fiber type and connector type.
CNFE2MC2C ComFit 10/100 Mbps Ethernet Media Converter See SFP Modules data sheet for optional distances, fiber type and connector type.
Accessories
Options
DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
[2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to
improve and advance technology, product specifications are subject to change without notice.
OPTICAL FIBER
COPPER CABLE
15 May 2014© 2014 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]