Data Sheet

26 Sep 2013
© 2013 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
CNFE2MC, CNFE22MC,
CNFE2MC/M & CNFE2MCAC/M
10/100 Mbps Ethernet Electrical to Optical Media Converter
SPECIFICATIONS
TYPICAL APPLICATION
OPTICAL FIBER
Data
Data Interface Ethernet
Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port/Full
Duplex Optical Port
Fibers
1
SFP Dependent
Fiber Connectors Requires selection of sold-separately SFP
modules. See ComNet data sheet for number and
description of SFP modules
Connectors
Power Terminal Block
Electrical RJ45
LED Indicators - Optical Link/Data Activity
- Power
Power
Operating Voltage Range 8-15 VDC (CNFE2MCAC/M: 24VAC)
Power Consumption 4W (CNFE2MCAC/M: 3W)
Electrical & Mechanical
Number of Rack Slots 1
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size
CNFE2MC, CNFE22MC 6.1 x 5.3 x 1.1 in (15.5 x 13.5 x 2.8 cm)
CNFE2MCM 3.3 x 2.5 x 1.1 in (8.4 x 6.4 x 2.8 cm)
Shipping Weight <2 lbs./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)
2
[1] Multimode fiber needs to meet or exceed fiber standard ITU-T
G.651. Single mode fiber needs to meet or exceed fiber standard
ITU-T G.652
CAT 5e/6
SFP Dependent selection
of Fiber Optic Cable(s)
E
E
E
E
CNFE2MC
CNFE2MC
CNFE22MC
ORDERING INFORMATION
Part Number Description
CNFE2MC ComFit 10/100 Mbps Ethernet Media Converter
CNFE22MC ComFit 2 Channel 10/100 Mbps Ethernet Media Converter
CNFE2MC-M Small-size 10/100 Mbps Ethernet Media Converter
CNFE2MCAC/M Small-size 10/100 Mbps Ethernet Media Converter with AC power
Accessories DC Plug-in Power Supply, 90-264 VAC, 50–60 Hz (Included)
Options [2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit - With Mounting Hardware (Optional, order model DINBKT1)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is
recommended. Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.