Data Sheet

ManualsBrandsComnet ManualsFiber Optic Transmission100 Mbps Ethernet Media Converter with PoE

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› 10/100 Mbps Ethernet

• 10/100 BASE-T/TX electrical port

• 100 BASE-FX optical port

› Electrical port supports Auto-Negotiation for 10 Mbps

or 100 Mbps, full duplex or half duplex data.

› Power over Ethernet (PoE) 30W@48VDC (not supported

on CNFE2MCPOE when mounted within ComNet rack)

› Optical port supports 100 Mbps full duplex data

› Automatic MDI/MDI-X crossover

› Distances up to 80 km with optional SFPs

› Designed to meet full compliance with the environmental

requirements (ambient operating temperature, mechanical

shock, vibration, humidity with condensation, high-line/low-

line voltage conditions and transient voltage protection) of

NEMA TS-1/TS-2 and the Caltrans Specification for Traffic

Signal Control Equipment.

› Uses interchangeable SFP for fiber type, distance

and connector (Ordered separately)

› Voltage transient protection on all power and signal input/

output lines provides protection from power surges and

other voltage transient events.

› No in-field optical adjustments required

› LED Indicators

› IEEE 802.3 compliant

› Lifetime Warranty

APPLICATIONS

› 10/100 Mbps Ethernet Media Converter

› High Speed Computer Links

› PoE Power Source

* Small Form-Factor Pluggable Module. Sold separately.

The ComNet CNFE2MCPOE[2,/M] Ethernet media converter is designed to transmit

and receive 10/100 Mbps data over optical fiber through user selectable SFP*

modules. These models require the ordering of sold-separately interchangeable SFP

modules for fiber type, distance and connectors. The CNFE2MCPOE[2,M] transmits

and receives a single channel of Ethernet data. It also supports IEEE 802.3at as Power

Sourcing Equipment (PSE) with up to 30 Watts @ 48VDC. The electrical interface will

Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments.

The optical interface operates at a 100 Mbps Ethernet rate. It is environmentally

hardened to operate in extreme conditions.

CNFE2MCPOE[2,/M]

10/100 Mbps Ethernet media converter

Electrical to SFP Optical with Power over Ethernet

1 CHINCLUDEDFLEXIBILITY

30W PSE -40º TO

75º

Summary of content (2 pages)

PAGE 1
0/100 Mbps Ethernet media converter Electrical to SFP Optical with Power over Ethernet CNFE2MCPOE[2,/M] FLEXIBILITY INCLUDED 30W PSE -40º TO +75º 1 CH The ComNet CNFE2MCPOE[2,/M] Ethernet media converter is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP* modules. These models require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors.
PAGE 2
CNFE2MCPOE[2,/M] 10/100 Mbps Ethernet media converter Electrical to SFP Optical with Power over Ethernet SPECIFICATIONS Data Data Interface Electrical & Mechanical Ethernet Data Rate 10/100 Mbps IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Port/Full Duplex Optical Port Fibers¹ SFP Dependent Connectors Environmental Optical Requires selection of sold-separately SFP modules.