Spec Sheet

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FEATURES
› Easily combines operating power and 10/100/1000TX
Ethernet data to one network cable
› Fully Compliant with IEEE Standard 802.3at for Power
Sourcing Equipment
› Provides up to 75 W or 95 W of PoE power for ultra high
power PD devices
› Designed for deployment in industrial -40º to +75º C
operating environments.
› Rugged, compact package with built-in AC-to-DC power
supply
› Ease of installation & true plug-and-play operation: no user
configuration or settings required
› Unit is designed to be wall mounted
› Provides 6 KV (10/700µs) surge protection
APPLICATIONS
› Remote operating power for IP CCTV cameras for security
and surveillance systems
› Remote operating power for Voice over IP (VoIP) telephony
networks
› Remote operating power for wireless LAN access points
› Industrial Security, Transportation/ITS, and Industrial Control/
Factory Automation IP Networks
The ComNet CNGE1IPSXXAC series consists of industrial Power over Ethernet
midspan injection modules that inject 50-57 VDC at to any network cable.
Operating power and 10/100/1000TX Ethernet data are easily combined on
one cable, eliminating the need to install additional power outlets and electrical
cabling. The CNGE1IPS95 is fully compliant with the requirements of IEEE 802.3at
for Power Sourcing Equipment (PSE), and features auto detection of powered
devices (PDs). Transmission distances of up to 328 feet (100 meters) are supported,
and this injector supplies operating power for PDs drawing a maximum of 75
and/or 95 watts (model dependent). Ideally suited to fiber optic, wireless, or
other networks where it may be difficult to furnish operating power to the PDs,
the CNGE1IPSXXAC series offers a true plug-and-play product requiring no user
configuration or other set-up.
CNGE1IPSXXAC Series
Industrial 75W and 95W Power over Ethernet (POE++)
Midspan Injector for 10/100/1000TX
95 W PoE++ 60 W PoE++ 30 W PoE+1000 MBPS-40º TO
+
75ºDIN RAIL