Installation Manual

INS_CNGE2+2SMS_REV–
02/19/13 PAGE 19
INSTALLATION AND OPERATION MANUAL CNGE2+2SMS[POE][HO]
TECH SUPPORT: 1.888.678.9427
RSTP System Configuration
The Rapid Spanning Tree Protocol (RSTP) is an evolution of the Spanning Tree Protocol. It provides
faster spanning tree convergence after a topology change. The system also supports STP and the
system will auto detect the connected device that is running STP or RSTP protocol.
RSTP System configuration interface
Label Description
Enable RSTP Select to enable RSTP (only available when the DIP switch settings
have been overridden by web management mode. See Page 11.)
Priority Configure Bridge priority, must be a multiple of 4096
Root Bridge ID MAC address of the root bridge