Installation Manual

INS_CNGE2+2SMS_REV–
02/19/13 PAGE 26
INSTALLATION AND OPERATION MANUAL CNGE2+2SMS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Network Interface Configuration
Interface Configuration interface
Label Description
Host Name Assign a name to the device (this is used for CLI and SNMP functions)
Enable DHCP To enable or disable the DHCP client function. When DHCP client
function is enabled, the switch will be assigned the IP address from the
network DHCP server. The default IP address will be replaced by the IP
address which the DHCP server has assigned.
IP Address Assign the IP address that the switch will use. If DHCP client Function is
enabled, you do not need to assign the IP address.
Gateway Assign the network gateway for the switch.
Subnet Mask Assign the subnet mask for the switch.
Primary DNS Assign the primary DNS IP address
Secondary DNS Assign the secondary DNS IP address
Apply Select Apply to set the configurations. (A system reset will be required)