Installation Manual

INS_CNGE2+2SMS_REV–
02/19/13 PAGE 27
INSTALLATION AND OPERATION MANUAL CNGE2+2SMS[POE][HO]
TECH SUPPORT: 1.888.678.9427
SNMP
Simple Network Management Protocol (SNMP) is the protocol developed to manage nodes
(servers, workstations, routers, switches and hubs etc.) on an IP network. SNMP enables network
administrators to manage network performance, find and solve network problems, and plan for
network growth. Network management systems learn of problems by receiving traps or change
notices from network devices implementing SNMP.
SNMP – Agent Config
You can set SNMP agent related information by Agent Setting Function.
SNMP Community Configuration interface
The following table describes the labels in this screen.
Label Description
SNMP V1/V2c
Community
SNMP Community should be set for SNMP V1/V2c. Three sets of
“Community String/Privilege” are supported. Each Community String is
maximum 32 characters. Keep empty to remove this Community string.
Apply Select Apply to activate the configurations.
Help Show help file.