System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 101
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
Commands Set List—SNTP command set
Commands Level Description Example
sntp enable G Enable SNTP function switch(config)#sntp enable
sntp daylight G Enable daylight saving time, if SNTP
function is inactive, this command
can’t be applied.
switch(config)#sntp daylight
sntp daylight-period
[Start time] [End time]
G Set period of daylight saving time,
if SNTP function is inactive, this
command can’t be applied.
Parameter format:
[yyyymmdd-hh:mm]
switch(config)# sntp daylight-period
20060101-01:01 20060202-01-01
sntp daylight-offset
[Minute]
G Set offset of daylight saving time,
if SNTP function is inactive, this
command can’t be applied.
switch(config)#sntp daylight-offset 3
sntp ip
[IP]
G Set SNTP server IP, if SNTP function
is inactive, this command can’t be
applied.
switch (conf ig) #sntp ip 192.169.1.1
sntp timezone
[Timezone]
G Set timezone index, use “show sntp
timzezone” command to get more
information of index number
switch(config)#sntp timezone 22
show sntp P Show SNTP information switch#show sntp
show sntp timezone P Show index number of time zone list switch#show sntp timezone
no sntp G Disable SNTP function switch(config)#no sntp
no sntp daylight G Disable daylight saving time switch(config)#no sntp daylight