System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 46
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
Label Description
Path Cost (1-200000000) The cost of the path to the other bridge from this transmitting
bridge at the specified port. Enter a number 1 through 200,000,000.
Port Priority (0-240) Decide that port should be blocked by priority in LAN. Enter a
numerical value that is a multiple of 16, 0 through 240.
Admin P2P Some of the rapid state transactions that are possible within RSTP
are dependent upon whether the port concerned can only be
connected to exactly one other bridge (i.e. It is served by a point-to-
point LAN segment), or it can be connected to two or more bridges
(i.e. It is served by a shared medium LAN segment). This function
allows the P2P status of the link to be manipulated administratively.
True means P2P enabling. False means P2P disabling.
Admin Edge The port directly connected to end stations, and it cannot create
bridging loop in the network. To configure the port as an edge port,
set the port to True.
Admin Non STP The port includes the STP mathematic calculation. True is not
including STP mathematic calculation. False is including the STP
mathematic calculation.
Apply Select Apply to activate the configurations.