System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 53
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
Label Description
VLAN Operation Mode Select VLAN Operation Mode: Disable, Port Base, 802.1Q
GVRP Mode Enable/Disable GVRP function.
Management VLAN ID Management VLAN can provide network administrator a secure
VLAN to management Switch. Only the devices in the management
VLAN can access the switch.
Port Select the port to configure.
Link type Select Link Type from the following options:
Access Link: Single switch only, allows grouping of ports by
setting the same VID.
Trunk Link: Extended application of Access Link, allows
grouping of ports by setting the same VID with 2
or more switches.
Hybrid Link: Both Access Link and Trunk Link are available.
Hybrid(QinQ) Link: Allows one more VLAN tag in a original VLAN
frame.
Untagged VID Set the port default VLAN ID for untagged devices that connect to
the port. The range is 1 to 4094.
Tagged VIDs Set the tagged VIDs to carry different VLAN frames to other switch.
Apply Select Apply to activate the configurations.