System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 84
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
CLI Management by Telnet.
Users can use telnet to configure the switches.
The default value is as below:
IP Address: 192.168.10.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.10.254
User Name: admin
Password: admin
Follow the steps below to access the console via Telnet.
Step 1. Telnet to the IP address of the switch from the Windows Run command (or from the
MS-DOS prompt).
Step 2. The Login screen will appear. Use the keyboard to enter the Username and Password
(same as for accessing via Web Browser), and then press Enter.