System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 85
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
Commands Level
Modes Access Method Prompt Exit Method About This Model
User EXEC Begin a session
with your switch.
switch> Enter logout or
quit.
The user command available
at the level of user is the
subset of those available at the
privileged level.
Use this mode to
• Enter menu mode.
• Display system information.
Privileged
EXEC
Enter the enable
command while
in user EXEC
mode.
switch# Enter disable to
exit.
The privileged command is
advance mode
Privileged this mode to
• Display advance function
status
• save configures
Global
configuration
Enter the
configure
command while
in privileged
EXEC mode.
switch(config)#To exit to
privileged
EXEC mode,
enter exit or
end
Use this mode to configure
parameters that apply to your
Switch as a whole.
VLAN
database
Enter the vlan
database
command while
in privileged
EXEC mode.
switch(vlan)# To exit to user
EXEC mode,
enter exit.
Use this mode to configure
VLAN-specific parameters.
Interface
configuration
Enter the
interface
command (with a
specific interface)
while in global
configuration
mode
switch(config-
if)#
To exit to global
configuration
mode,
enter exit.
To exist
privileged
EXEC mode or
end.
Use this mode to configure
parameters for the switch and
Ethernet ports.