System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 98
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
Commands Set List—802.1x command set
Commands Level Description Example
8021x enable G Use the 802.1x global configuration
command to enable 802.1x protocols.
switch(config)# 8021x enable
8021x system radiousip
[IP address]
G Use the 802.1x system radious IP
global configuration command to
change the radious server IP.
switch(config)# 8021x system radiousip
192.168.1.1
8021x system serverport
[port ID]
G Use the 802.1x system server port
global configuration command to
change the radious server port
switch(config)# 8021x system serverport
1815
8021x system accountport
[port ID]
G Use the 802.1x system account port
global configuration command to
change the accounting port
switch(config)# 8021x system accountport
1816
8021x system sharekey
[ID]
G Use the 802.1x system share key
global configuration command to
change the shared key value.
switch(config)# 8021x system sharekey
123456
8021x system nasid
[words]
G Use the 802.1x system nasid global
configuration command to change
the NAS ID
switch(config)# 8021x system nasid test1
8021x misc quietperiod
[sec.]
G Use the 802.1x misc quiet period
global configuration command to
specify the quiet period value of the
switch.
switch(config)# 8021x misc quietperiod 10
8021x misc txperiod
[sec.]
G Use the 802.1x misc TX period global
configuration command to set the TX
period.
switch(config)# 8021x misc txperiod 5
8021x misc supportimeout
[sec.]
G Use the 802.1x misc supp timeout
global configuration command to set
the supplicant timeout.
switch(config)# 8021x misc supportimeout
20
8021x misc servertimeout
[sec.]
G Use the 802.1x misc server timeout
global configuration command to set
the server timeout.
switch(config)#8021x misc servertimeout
20
8021x misc maxrequest
[number]
G Use the 802.1x misc max request
global configuration command to set
the MAX requests.
switch(config)# 8021x misc maxrequest 3
8021x misc reauthperiod
[sec.]
G Use the 802.1x misc reauth period
global configuration command to set
the reauth period.
switch(config)# 8021x misc reauthperiod
3000
8021x portstate
[disable | reject | accept |
authorize]
I Use the 802.1x port state interface
configuration command to set the
state of the selected port.
switch(config)#interface fastethernet 3
switch(config-if)#8021x portstate accept
show 8021x E Display a summary of the 802.1x
properties and also the port sates.
switch>show 8021x
no 8021x G Disable 802.1x function switch(config)#no 8021x