Data Sheet

16 May 2016© 2016 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
CNGE3FE7MS3
Environmentally Hardened Managed Ethernet Switch with
(7) 10/100TX + (3) configurable 10/100/1000TX / 100/1000FX Ports
SPECIFICATIONS
Ethernet Ports
10/100BASE-T(X) 7 × RJ-45 Ports
10/100/1000BASE-T(X) 3 × Combo Ports, with Auto MDI/MDIX and (3)
100/1000BASE-FX SFP¹ Ports
Power Connector Terminal Block
Switch Properties
Switching Latency 7 μs
Switching Bandwidth 7.4 Gbps
Max. VLANs Available 4096
IGMP Multicast Groups 1024
Port Rate Limiting User Defined
MAC Table 8192 MAC addresses available
Priority Queues 4
Processing Store-and-Forward
Flash Memory 32 Mbits
DRAM Size 256 Mbits
Security Features
Device Binding Security Feature
Enable/Disable Ports, MAC based port security
Port-Based Network Access Control: 802.1x
VLAN (802.1Q): To segregate and secure network traffic
Radius Centralized Password Management
SNMPv3 Encrypted Authentication and Access Security
TACACS+
HTTP / SSH enhance network security
Network Redundancy
C-Ring Com-Ring
Legacy Ring C-RSTP
STP RSTP
MSTP
Alarms & Monitoring Systems
Relay Output For fault event alarming. Relay contacts rated at 1
amp @ 24VDC
Serial Console RJ-45 Port RS-232 @ 9,600 bps with console cable (included)
Fault Alarm Relay
Relay Contact Rating 24VDC @ 1 A
Power
Input Redundant Input Power, Dual DC Inputs
Operating Voltage Range 12 to 48 VDC
Power Consumption, Typical 12 W
Current Protection Overload Current Protected
Polarity Protection Reverse Polarity Protected
Electrical & Mechanical
LED Status Indicators Power R.M. Ring Fault
RJ-45 Port SFP Port.
Size 2.93 × 4.3 × 6.05 in (7.43 × 10.92 × 15.36 cm)
Installation DIN Rail (35 mm Track) or Wall Mount
Shipping Weight 2.29 lb /1.04 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C (-40˚ F to +167˚ F)
Functional to +85˚ C (185º F)
Storage Temp -40˚ C to +85˚ C (-40 to 185°F)
Relative Humidity 5% to 95% (non-condensing)
Ethernet Standards Supported
IEEE 802.3 for 10BASE-T
IEEE 802.3u for 100BASE-TX and 100BASE-FX
IEEE 802.3z for 1000BASE-X
IEEE 802.3ab for 1000BASE-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
Regulatory Approvals
EMI FCC Part 15, EN55022, EN61000-3-2,
EN61000-3-3, CISPR (EN55022) Class A
ESD EN61000-4-2
RS EN61000-4-3
EFT EN61000-4-4
Electrical Surge EN61000-4-5
CS EN61000-4-6, EN61000-4-11, EN61000-4-8
Immunity EN55024
Mechanical Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
ORDERING INFORMATION
Part Number Description
CNGE3FE7MS3 (7) 10/100BASE-T(X) / (3) 10/100/1000BASE-T(X) or 100/1000BASE-FX SFP Ports
Accessories DC Plug in Power Supply, 90-264VAC, 50/60Hz (Included, for benign 0 to 50ºC applications only. Hardened power supply available, consult factory)
DIN Rail Power supply (sold separately)
[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
A
GENCY COMPLIANCE