User Manual

INS_CNGEMC4+2[POE][HO]/M 09/08/20 PAGE 30

INSTALLATION AND OPERATION MANUAL CNGEMC4+2[POE][HO]/M

TECH SUPPORT: 1.888.678.9427

Command Line Interface Management

How to access the Command Line Interface (CLI)

CLI access is provided by connecting a USB cable from a PC to the Media Converter.

The PC should recognize the device and assign a COM Port to the device. Please refer to your PC

documentation to determine which COM port was assigned to the media converter.

CLI Serial Settings (115200 Baud, 8, non, 1, none)

To connect to CLI, you will a terminal emulator application that can communicate using serial

protocol. The following example will use Tera Term.

https://ttssh2.osdn.jp/index.html.en

Step 1. Download and install Tera Term.

Step 2. Connect PC to Media Converter, verify that a COM port was assigned to the device.

Step 3. Start Tera Term.

Step 4. Configure Serial Settings by Selecting Setup -> Serial

Step 5. Configure the following Settings.

Note: Select the appropriate COM port for your device.

Step 6. Hit enter to initiate the connection and receive the Username prompt. After a successful