Spec Sheet

11 Nov 2020
© 2021 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
INFO@COMNET.NET
SUITE 7, CASTLEGATE BUSINESS PARK
|
CALDICOT
|
SOUTH WALES, UK NP26 5AD
|
T: +4 4 (0) 2036 300 695
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
CNGEUMC4+2(TX,RX)/M
10/100/1000 Mbps Unidirectional Media Converter
SPECIFICATIONS
Data
Data Interface Ethernet
Data Rate 10/100/1000 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Ports/Full
Duplex Optical Port
Connectors
Optical Requires selection of sold-separately SFP modules.
See ComNet data sheet for number
and description of SFP modules.
Serial Mini USB
I/O Terminal Block
Power Terminal Block
Data RJ45
Management
HTTP Web GUI Smart Interface
CLI Serial Command Line Interface
Contacts
Response Time 25ms typical (network dependent)
Input/Output Channels 2
Inputs 2 × Dry Closure
Outputs 2 × Form A contacts (Rated 1A @ 24 VDC, non-
resistive loads)
Power
Operating Voltage Dual 9 to 36 VDC or 24 VAC
Current Draw 6W Max
Current Protection Automatic Resettable Solid-State Current Limiters
Electrical & Mechanical
Indicating LEDs Optical Link/Data Activity Power
Electrical Link/Data Activity Status
Circuit Board Meets IPC Standard
Size 4.1 × 3.7 × 2.2 in (10.4 × 9.4 × 5.6 cm)
Surface Mount Wall or Flat Surface Screw Attachment
Shipping Weight <2 lb / 0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)²
TYPICAL APPLICATIONS
ORDERING INFORMATION
Part Number Description
CNGEUMC4+2TX/M Small Surface Mount 6 Port Gigabit Ethernet Unidirectional Media Converter, 2 SFP FX, 4TX, 2 Contact Closure
CNGEUMC4+2RX/M Small Surface Mount 6 Port Gigabit Ethernet Unidirectional Media Converter, 2 SFP FX, 4TX, 2 Contact Closure
Included Accessories DC Plug-in Power Supply, 90-264 VAC, 50-60 Hz (For benign 0 to 5C applications only. Hardened power supply available, consult factory)
Options User-selection of SFP or CopperLine CL-SFP modules (Extra charge, see SFP data sheets for product numbers and compatibility before ordering)
[2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT2 or DINBKT4)
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
RSFP
With RSFP Enabled, SFP ports 5 and 6 will create a trunk with port 6 being the active port and port 5 being the failover port.
MUX
With MUX Enabled, Ethernet traffic on a port is isolated to the same port on the remote device.
CNGEUMC4+2/MCNGEUMC4+2/M
1
2
3
4
1
2
3
4 55
66
IPIP End DeviceEnd Device Active
Failover
IPIP End DeviceEnd Device
IPIP End DeviceEnd Device
IPIP End DeviceEnd Device
CNGEUMC4+2/MCNGEUMC4+2/M
1
2
3
4
1
2
3
4 55
66
IPIP End DeviceEnd Device
IPIP End DeviceEnd Device
IPIP End DeviceEnd Device
IPIP End DeviceEnd Device
A
GENCY COMPLIANCE