Data Sheet

26 Feb 2016
© 2016 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
CNMC[2]SFP[POE][/M] Series
10/100/1000 Mbps Ethernet Media Converters with
100FX and 1000FX Support + Optional Power over Ethernet (PoE)
SPECIFICATIONS
TYPICAL APPLICATIONS
ORDERING INFORMATION
Part Number Description # Rack Slots
CNMCSFP/M Mini 10/100/1000Mbps Ethernet Media Converter N/A
CNMCSFPPOE/M Mini 10/100/1000Mbps Ethernet Media Converter with IEEE 802.3at 30W PoE+ N/A
CNMCSFP ComFit 10/100/1000Mbps Ethernet Media Converter 1
CNMC2SFP ComFit Dual 10/100/1000Mbps Ethernet Media Converter 1
CNMC2SFPPOE ComFit Dual 10/100/1000Mbps Ethernet Media Converter with IEEE 802.3at 30W PoE+ 1
Included Accessories DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included, for benign 0 to 50ºC applications only. Hardened power supply available, consult factory)
Options 48 Volt DC Plug-in Power Supply for use with CNMCSFPPOE/M model only (Extra charge, consult factory).
User selection of ComNet SFP (see SFP Modules data sheet for product numbers and compatibility before ordering)
[2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Kit - With Mounting Hardware (Optional, order model DINBKT4)
Note: In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
Fiber Count, Type and
Distance are dependent
on SFP selection
CNMCSFP
CNMC2SFP
CNMCSFPPOE
48 – 57 VDC INPUT
CNMCSFP
CNMCSFP/M
CNMCSFP/M
CNMCSFP
E
E
E
E
E
E
E
E
Optical Fiber
Copper Cable
30W PoE Power
PoE
Data
Data Interface Ethernet
Data Rate 10/100/1000 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port/ Full
Duplex Optical Port
Connectors¹
Power Terminal Block
Optical SFP dependent
Electrical RJ45
Fibers¹ SFP Dependent
Fiber Connectors Requires selection of sold-separately SFP modules.
See ComNet data sheet for number
and description of SFP modules.
Power
Operating Voltage Range Non-PoE: 9-24 VDC @ 200mA Max,
or 24 VAC @ 200mA Max
PoE: 48 – 57 VDC @ 0.85A (not included)
Power Consumption CNMCSFPPOE/M: 35W (with full PoE+ load)
Surface Mount: 5W
Current Protection Automatic Resettable Solid-State Current Limiters
Electrical & Mechanical
LED Indicators › Optical Link/Data Activity › Power
› POE Enabled (CNMCSFPPOE/M only)
Circuit Board Meets IPC Standard
ComFit Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
ComFit Rack Slots 1
Mini Size 3.3 x 2.5 x 1.1 in (8.4 x 6.4 x 2.8 cm)
Shipping Weight <2 lbs./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)²
[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651.
Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
A
GENCY COMPLIANCE