Installation Manual

ManualsBrandsComnet ManualsElectronics10/100/1000Mbps Multi-Rate Media Converter

INS_CNMC[2]SFP[POE][/M]_REV–

06/06/12

PAGE 1

INSTALLATION AND OPERATION MANUAL

CNMC[2]SFP[POE][/M] Series

10/100/1000MBPS ETHERNET MEDIA CONVERTERS

WITH 100FX AND 1000FX SUPPORT

The ComNet

™

CNMC[2]SFP[POE][/M] Series products convert one or two Ethernet

signals from electrical to optical and optical to electrical. The devices accept a 10/100

or 1000Mbps electrical input and convert this to a 100/1000Mbps optical output

and the 100/1000Mbps optical input back to the 10/100/1000Mbps electrical

output. The products in this series use either one or two optical fibers, depending

upon the selection of sold-separately SFP optical module. The CNMCSFPPOE/M

additionally supplies IEEE802.3at (30W) compliant Power over Ethernet (PoE) to the

remote end.

The CNMC[2]SFP[POE][/M] Series is designed to operate in harsh industrial

environments with no electrical or optical adjustments required (Plug and Play).

The optical data rate of 100FX or 1000FX is selected by a dip switch. See Figure 9

on Page 6 for dip switch settings. “Auto-Negotiating” is supported on the copper

interface side.

LED indicators are provided for confirming equipment operating status. See Figure

10 on Page 6 for LED indicator descriptions.

See Figures 1 – 11 for complete installation details.

The CNMCSFP/M and CNMCSFPPOE/M are supplied in a surface mount “Mini”

package. The ComFit units in this series can be surface mounted or installed in the

ComNet card cages. See Figures A and B on Page 7 for mounting instructions.

Rev. 11/16/15

This manual serves the following

ComNet Model Numbers:

CNMCSFP/M

CNM CSFPPOE/M

CNM CSFP

CNM C2SFP

Summary of content (7 pages)

PAGE 1
INSTALLATION AND OPERATION MANUAL CNMC[2]SFP[POE][/M] Series 10/100/1000MBPS ETHERNET MEDIA CONVERTERS WITH 100FX AND 1000FX SUPPORT This manual serves the following ComNet Model Numbers: CNMCSFP/M CNMCSFPPOE/M CNMCSFP CNMC2SFP The ComNet™ CNMC[2]SFP[POE][/M] Series products convert one or two Ethernet signals from electrical to optical and optical to electrical.
PAGE 2
INSTALLATION AND OPERATION MANUAL CNMC[2]SFP[POE][/M] Series FIGURE 1 – CNMCSFP/M SMALL SIZE UNIT OPTICAL FIBER DETERMINED BY SELECTION OF SFP MODULE CNMCSFP/M MULTI RATE MEDIA CONVERTER FIBER LINK/ACT 1000 FX 100 FX TM POWER CAT5e/6 COPPER BLACK ~/~/+ BLACK WITH WHITE STRIPE Surface Mount Power: 9 – 24 VDC @ 200mA max. OR 24 VAC @ 200mA max.
PAGE 3
INSTALLATION AND OPERATION MANUAL CNMC[2]SFP[POE][/M] Series FIGURE 3 – CNMCSFPPOE/M SMALL SIZE UNIT OPTICAL FIBER DETERMINED BY SELECTION OF SFP MODULE CAT5e/6 IEEE802.3at (30W) PoE BLACK BLACK WITH WHITE STRIPE Surface Mount Power: 48 – 57 VDC @ 0.85A FIGURE 4 – CNMCSFPPOE/M SMALL SIZE UNIT FRONT PANEL TECH SUPPORT: 1.888.678.
PAGE 4
INSTALLATION AND OPERATION MANUAL CNMC[2]SFP[POE][/M] Series FIGURE 5 – CNMCSFP COMFIT UNIT OPTICAL FIBER DETERMINED BY SELECTION OF SFP MODULE CAT5e/6 BLACK BLACK WITH WHITE STRIPE Surface Mount Power: 9 – 24 VDC @ 200mA max. FIGURE 6 – CNMCSFP COMFIT UNIT FRONT PANEL TECH SUPPORT: 1.888.678.9427 OR 24 VAC @ 200mA max.
PAGE 5
INSTALLATION AND OPERATION MANUAL CNMC[2]SFP[POE][/M] Series FIGURE 7 – CNMC2SFP COMFIT UNIT OPTICAL FIBER DETERMINED BY SELECTION OF SFP MODULE CAT5e/6 OPTICAL FIBER DETERMINED BY SELECTION OF SFP MODULE CAT5e/6 BLACK BLACK WITH WHITE STRIPE Surface Mount Power: 9 – 24 VDC @ 200mA max. FIGURE 8 – CNMC2SFP COMFIT UNIT FRONT PANEL TECH SUPPORT: 1.888.678.9427 OR 24 VAC @ 200mA max.
PAGE 6
INSTALLATION AND OPERATION MANUAL CNMC[2]SFP[POE][/M] Series FIGURE 9 – DIP SWITCH SETTINGS Position Resulting Data Rate OFF 1000FX (requires use of Gigabit SFP module) ON 100FX NOTE: Select the Data Rate before powering on the unit. After a Data Rate change, re-cycle power to the unit.
PAGE 7
MECHANICAL INSTALLATION INSTRUCTIONS INSTALLATION CONSIDERATIONS FIGURE A This fiber-optic link is supplied as a Standalone/Rack module. Units should be installed in dry locations protected from extremes of temperature and humidity.