Data Sheet

specifications
06.11.10© 2010 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [e-mail]
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: [phone] | F: [phone] | [e-mail]
VIDEO
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5V pk-pk
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <2%
Differential Phase: <0.7˚
Tilt: <1%
Signal-to-Noise Ratio (SNR): 67 dB @ Maximum Optical Loss Budget
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to
maintain 6Mhz Bandwidth
DATA
Data Format: RS-232, RS-422, 2 or 4-wire RS-485 w/Tri-State,
Manchester, bi-phase and up-the-coax data
Data Rate: DC-115 Kbps (NRZ)
WAVELENGTH 1310/1550 nm
NUMBER OF FIBERS 1
OPTICAL EMITTER Laser Diode
LED INDICATORS - Video Sync Presence - Received Data
- Transmitted Data - Optical Carrier Detect
CONNECTORS
Optical: ST (Standard)
SC or FC (Optional)
Power: Terminal Block
Video: BNC (Gold Plated Center-Pin)
Data: Terminal Block
ELECTRICAL & MECHANICAL
Power:
Surface Mount: 8-15 VDC @ 2W
Rack Mount: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State
Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 x 5.3 x 1.1 in.,
(15.5 x 13.5 x 2.8 cm)
Shipping Weight: <2 lb./0.9 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)
†
†
May be extended to condensation conditions by adding suffix ‘/C’
to model number for conformal coating.
Accessories
Options
9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
Add ‘/SC’ for SC Connectors
Add ‘/FC’ for FC Connectors
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
**Distance may be limited by optical dispersion. Check with control system manufacturer for distance limits on up-the-coax systems.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
10-bit digital video with bi-directional
and up-the-coax data transmitter and receiver
OPTICAL FIBER
VIDEO (Coax)
1 Fiber
62.5/125µm MM
Up to 3 km
(2 miles)
V V
D D
FVT1031M1
FVR1031M1
COMPAK1031M1
FVT1031M1 + FVR1031M1
Video Transmitter/Data Transceiver
Video Receiver/Data Transceiver
PART
NUMBER
OPTICAL
PWR BUDGET
MAX.
DISTANCE
†
MAX. UTC
DISTANCE
†
# RACK
SLOTS
FVT1031M1
FVR1031M1
Multimode
62.5/125µm
FIBERS
REQ’DDESCRIPTION
FIBER
1
3 km (2 mi)
1 km (0.6 mi) 1
16 dB
MADE IN THE
USA