Data Sheet

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› Digitally-encoded video transmission: transmits eight real-

time color video signals and 2 bi-directional data signals on

one optical fiber

› Supports RS232, RS422, and 2- or 4-wire RS485

› Compatible with all NTSC, PAL, or SECAM CCTV camera

systems

› Designed to meet full compliance with the environmental

requirements (ambient operating temperature, mechanical

shock, vibration, humidity with condensation, high-line/low-

line voltage conditions and transient voltage protection) of

NEMA TS-1/TS-2 and the Caltrans Specification for Traffic

Signal Control Equipment.

› Voltage transient protection on all power and signal input/

output lines provides protection from power surges and

other voltage transient events.

› Robust design ensures extremely high reliability in

unconditioned out-of-plant environments

› Bi-color (Red/Green) LED status indicators provide rapid

indication of critical operating parameters

› Hot-swappable rack modules

› Interchangeable between stand-alone or rack mount use –

ComFit

› May be DIN-rail mounted with the ComNet model DINBKT4

adaptor (sold separately)

› Lifetime Warranty

APPLICATIONS

› High-Performance CCTV (Fixed Video)

The ComNet

™

FVT/FVR812(M,S)1 series transmits eight channels of video utilizing

state of the art digital encoding and decoding for high-quality video transmission,

along with two channels of bi-directional data and one bi-directional contact closure

over one single mode or multimode optical fiber. This equipment is environmentally

hardened and suitable for use in unconditioned roadside or out-of plant installations.

The units are compatible with NTSC, PAL and SECAM video transmission protocols

and support bi-directional RS232, 422 and 485 (2 & 4 Wire) data. Plug-and-play design

ensures ease of installation and no electrical or optical adjustments are required.

COMPAK812M1

8-channel Digitally Encoded Video

+ 2 Bi-directional Data Channels + Bi-directional Contact Closure

2 1

8HARDENEDINCLUDED

PAGE 1
8-channel Digitally Encoded Video + 2 Bi-directional Data Channels + Bi-directional Contact Closure COMPAK812M1 INCLUDED HARDENED 8 2 1 The ComNet™ FVT/FVR812(M,S)1 series transmits eight channels of video utilizing state of the art digital encoding and decoding for high-quality video transmission, along with two channels of bi-directional data and one bi-directional contact closure over one single mode or multimode optical fiber.
PAGE 2
8-channel Digitally Encoded Video + 2 Bi-directional Data Channels + Bi-directional Contact Closure COMPAK812M1 SPECIFICATIONS Video Optical Emitter Video Input 1 volt pk-pk (75 ohms) Overload >1.5V pk-pk # Input/Output Channels 8 Bandwidth (minimum) 10 Hz - 6.5 MHz per channel Differential Gain <4% Differential Phase <0.7˚ Tilt <1% Signal-to-Noise Ratio (SNR) 57 dB Typical Max.