Data Sheet

07 May 2014
© 2014 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
INFO@COMNET.NET
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: +44 (0)113 307 6400
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
COMPAK812M1
8-channel Digitally Encoded Video
+ 2 Bi-directional Data Channels + Bi-directional Contact Closure
SPECIFICATIONS
INCLUDED IN KIT
Video
Video Input 1 volt pk-pk (75 ohms)
Overload >1.5V pk-pk
# Input/Output Channels 8
Bandwidth (minimum) 10 Hz - 6.5 MHz per channel
Differential Gain <4%
Differential Phase <0.7˚
Tilt <1%
Signal-to-Noise Ratio (SNR) 57 dB Typical
Max. RG-59 COAX Distance 100m (300ft) Camera to Fiber Optic Module to
maintain 6Mhz Bandwidth
Data
Data Channels: 2
Data Interface: RS232, RS422 and RS485 (2W/4W)
Data Format: NRZ, NRZI, Manchester, Bi-Phase and Sensornet
Data Rate: DC-250 Kbps (NRZ)
Bit Error Rate: <1 in 10-9 @ Maximum Optical Loss Budget
Operating Mode: Simplex or Full-Duplex
Contact
Contact Interface Response Time: 0.5 msec
Input Dry Contact Closure
Output SPST Relay, 0.5 A Contact Rating – normally open
Wavelength 1310/1550 nm, Multimode and Single Mode
Number Of Fibers 1
Indicating LEDs - Video Sync Presence for Each Video Channel
- Received Data - Transmitted Data
- Optical Carrier Detect
Optical Emitter Laser Diode
Connectors
Optical ST
Power Terminal Block
Video BNC (Gold Plated Center-Pin)
Data Terminal Block
Contact Terminal Block
Power
Operating Voltage Range 8 to 15 VDC
Power Consumption 4W
Electrical & Mechanical
Number of Rack Slots: 3
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size 6.1 × 5.3 × 3.3 in (15.5 × 13.5 × 8.3 cm)
Shipping Weight <2 lb./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)¹
Part Number Description Fiber Optical Pwr Budget Max. Distance²
FVT812M1 Video Transmitter/Data, Contact Transceiver (1310/1550 nm) Multimode 62.5/125µm 16 dB 3 km (2 miles)
FVR812M1 Video Receiver/Data, Contact Transceiver (1550/1310 nm) Multimode 62.5/125µm 16 dB 3 km (2 miles)
Accessories
Options
2 × DC Power Supply (included)
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
[2] Distance may be limited by optical dispersion.
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
TYPICAL APPLICATION
FVT812 FVR812
C C
D
2
D
2
V
8
V
8
LEGEND
VIDEO (COAX)
OPTICAL FIBER