User Manual

24
7.4.3 IP Configuration
User can configure the IP Settings.

IP Address Mode:
Static: IP address of this switch will be assigned by user.
DHCP: IP address of this switch will be assigned by the network DHCP server.

IP Address: Assign the IP address that the network is using. If IP Address Mode
function is set in DHCP mode, user needn’t assign the IP address manually. The
network DHCP server will assign the IP address that is going to be displayed in this
column for the switch. The default IP is 192.168.10.1

Subnet Mask: Assign the subnet mask of the IP address. If IP Address Mode function
is in DHCP mode, user need not assign the subnet mask manually.

Gateway IP Address: Assign the network gateway for the switch. The default gateway
is 192.168.10.254

DNS1: Assign the IP address of DNS server1 that the network is using.

DNS2: Assign the IP address of DNS server2 that the network is using.

MAC Address: Display the unique hardware address assigned by manufacturer
(default)

And then, click