User Manual

45
VLAN Table Configuration - Edit interface
7.6.2 Rapid Spanning Tree
The Rapid Spanning Tree Protocol (RSTP) is an evolution of the Spanning Tree Protocol and
provides for faster spanning tree convergence after a topology change. The system also
supports STP and the system will auto detect the connected device that is running STP or
RSTP protocol.
7.6.2.1 STP System Configuration
 User can view spanning tree information about the Root Bridge

User can modify RSTP state. After modification, click .
 Mode: user must enable or disable RSTP function before configure the related
parameters
 Priority (0-61440): a value used to identify the root bridge. The bridge with the
lowest value has the highest priority and is selected as the root.
 Max Age (6-40): the number of seconds a bridge waits without receiving
Spanning-tree Protocol configuration messages before attempting a