User Manual

You can configure 802.1x authentication state for each port. The State provides Disable,

Authorize, Accept and Reject.

 Disable: This function is disabled.

 Authorize: The specified port is set to the Authorized or Unauthorized state in

accordance with the outcome of an authentication exchange between the supplicant

and the authenticator.

 Accept: The specified port will allow the client accessing in any case.

 Reject: The specified port rejects the client accessing regardless of whether the

authentication passed or not.



Click .

7.7.1.3 Radius Client Configuration

After having enabled the IEEE 802.1X function, user can configure the parameters of this

function.

1. Radius Server IP: Set the Radius Server IP address.

2. Server Port: Set the UDP destination port for authentication requests to the specified

Radius Server.

3. Accounting Port: Set the UDP destination port for accounting requests to the specified

Radius Server.

4. Shared Key: Set an encryption key for using during authentication sessions with the

specified radius server. This key must match the encryption key used on the Radius

Server.

5. NAS Identifier: A string used to identify this switch.

Click .