User Manual

64
Static MAC Addresses interface
Add the Static MAC Address
User can add static MAC address in switch MAC table.
1. MAC Address Port VLAN ID: list the MAC Address Port. VLAN ID
2. MAC Address: Specify the destination MAC address to add to the address table.
3. Port.No: pull down the selection menu to select the port number.
4. Vid: enter the Vid of the MAC address (between 1 and 4094).
5. Click .
6. If user wants to delete the MAC address from filtering table, select the MAC address
and click .
7.7.2.2 Filter MAC Address Table
MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on
the destination addresses. For example, if your network is congested because of high
utilization from one MAC address, you can filter all traffic transmitted to that MAC address,
restoring network flow while you troubleshoot the problem.