User Manual

74
System Commands Set
Netstar
Commands
Command
Level
Description
Defaults
Example
system name
[system name]
Global
configuration
mode
Set switch system name string
switch(config)#
system name xxx
system location
[system Location]
Global
configuration
mode
Set switch system location
string
switch(config)#
system location xxx
system
description
[description]
Global
configuration
mode
Set switch system description
string
switch(config)#
system description xxx
system contact
[contact]
Global
configuration
mode
Set switch system contact
window string
switch(config)#
system contact xxx
ip address
[ip-address]
[subnet-mask]
[gateway]
Global
configuration
mode
Use the ip address interface
configuration command to set
an IP address for a switch.
Use the no form
of this command to remove an
IP address or to disable IP
processing.
switch(config)#
ip address 192.168.1.1
255.255.255.0 192.168.1.254
write memory
Privileged
EXEC
Save user configuration into
permanent memory(flash rom)
switch#write memory