User Manual

78
rate-limit
output-rate
[value]
Interface
configuration
mode
Set rate-limit output rate
value.
Range is 1~3130 for 312Kbps
unit on the port.
Output rate limit must be
between 1~3130
Disable
switch (config)#interface
gigaethernet 1
switch (config-if)#
rate-limit output-rate 1000
shutdown
or
no shutdown
Interface
configuration
mode
Use the shutdown
Interface configuration
command to disable the port.
Use the no shutdown form of
this command to enable the
port.
Enable
switch (config)#interface
gigaethernet 1
switch(config-if)#
shutdown
switch(config-if)#
no shutdown
show interfaces
status
[gigaethernet|port
-channel|vlan]
[if-num]
Privileged
EXEC
Show interface configuration
status and configuration.
switch #
show interfaces status
gigaethernet 1
or
switch #
show interfaces status port-
channel 1
or
switch #
show interfaces status vlan 1
show interfaces
counters
[gigaethernet|port
-channel] [if-num]
Privileged
EXEC
Show interface statistic
counter.
switch #
show interfaces counters
gigaethernet 1
or
switch #
show interfaces counters
port-channel 1