User Manual

85
stp-admin-p2p
[disable|enable|aut
o]
Interface
configuration
mode
Use the stp-admp2p interface
configuration command to
configure a port AdmP2P
variable.
Enable
switch (config)#interface
gigaethernet 1
switch(config-if)#
stp-admin-p2p auto
or
switch(config-if)#
stp-admin-p2p enable
or
switch(config-if)#
stp-admin-p2p disable
stp-admin-edge
[disable|enable]
Interface
configuration
mode
Use the stp-admedge interface
configuration command to
configure a port AdmEdge
variable.
Enable
switch (config)#interface
gigaethernet 1
switch(config-if)#
stp-admin-edge enable
or
switch(config-if)#
stp-admin-edge disable
stp-admin- stp
[disable|enable]
Interface
configuration
mode
Use the stp-admstp interface
configuration command to
configure a port controlled by
stp protocol.
Enable
switch (config)#interface
gigaethernet 1
switch(config-if)# stp-admin stp
enable
VLAN Commands Set
Netstar
Commands
Command
Level
Description
Default
Example
vlan database
Privileged
EXEC
Enter VLAN configure mode
switch#vlan database
switch(vlan)#
vlanmode
[portbase| 802.1q|
gvrp ]
VLAN database
mode
To set switch VLAN mode.
8021q
switch(vlan)#vlanmode
portbase
or
switch(vlan)#vlanmode 802.1q
or
switch(vlan)#vlanmode gvrp
show vlan
or
VLAN database
Show VLAN information
switch(vlan)#show vlan