User Manual

54
7.6.5 SNTP
User can configure the SNTP (Simple Network Time Protocol) settings. The SNTP allows
user to synchronize switch clocks in the Internet.
1. 1. SNTP Server Link Status: Display the link status of SNTP server.
2. 2. Switch Current Time: Display the current time of the switch.
3. 3. SNTP Client: Enable or disable SNTP function. When it is enabled, user can assign the
domain name or IP address of SNTP server for getting the time from SNTP server.
4. 4. UTC Timezone: Set the switch location time zone. The following table lists the different
location time zone for your reference:
Local Time Zone!
Conversion from UTC !
Time at 12:00 UTC!
November Time Zone
- 1 hour
11am
Oscar Time Zone
-2 hours
10 am
ADT - Atlantic Daylight!
-3 hours!
9 am!
AST - Atlantic Standard
EDT - Eastern Daylight!
-4 hours!
8 am!
EST - Eastern Standard
CDT - Central Daylight!
-5 hours!
7 am!
CST - Central Standard
MDT - Mountain Daylight!
-6 hours!
6 am!
MST - Mountain Standard
PDT - Pacific Daylight!
-7 hours!
5 am!
PST - Pacific Standard
ADT - Alaskan Daylight!
-8 hours!
4 am!
ALA - Alaskan Standard!
-9 hours!
3 am!
HAW - Hawaiian Standard!
-10 hours!
2 am!
Nome, Alaska!
-11 hours!
1 am!