User Manual

81
Port Mirroring Commands Set
Netstar
Commands
Command
Level
Description
Default
Example
monitor
[port number]
[rx | tx | both]
or
no monitor [port
number| all]
Interface
configuration
mode
Use the port monitor interface
configuration command to
enable Switch Port Analyzer
(SPAN) port
monitoring on a port. Use the
no form of this command to
return the port to its default
value.
switch(config)#interface
gigaethernet 1
switch(config-if)#monitor 3 both
or
switch(config-if)#no monitor 3
or
(Disable)
switch(config-if)#
no monitor all
show monitor
Privileged
EXEC
Show port monitor information
switch#show monitor
TFTP Commands Set
Netstar
Commands
Command
Level
Description
Default
Example
backup
flash:backup_cfg
Global
configuration
mode
Save configuration to TFTP
server and need to specify the
IP of TFTP server and the file
name of image.
switch(config)#backup
flash:backup_cfg
restore
flash:restore_cfg
Global
configuration
mode
Get configuration from TFTP
server and need to specify the
IP of TFTP server and the file
name of image.
switch(config)#restore
flash:restore_cfg
TFTP server ip address
[192.168.10.2]:
Restore file name [restore.dat]:
*config success.*
upgrade
flash:upgrade_fw
Global
configuration
mode
Upgrade firmware by TFTP
and need to specify the IP of
TFTP server and the file name
of image.
switch(config)#upgrade
lash:upgrade_fw