Data Sheet

13 Feb 2017
© 2017 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
CWGE26FX2TX24MS
Commercial Managed Ethernet Switch (22) 10/100/1000 BASE-T(X)
+ (2) Gigabit Combo Ports + (2) 100/1000 BASE-FX
SPECIFICATIONS
Connectors
10/100/1000Base-TX 22 × RJ-45 Ports with Auto MDI/MDIX
10/100/1000Base-TX 2 × RJ-45 Ports with Auto MDI/MDIX
or 2 × 100/1000Base-FX SFP
100/1000Base-FX 2 × SFP¹ Ports
Console Port RS-232 in DB9 connector with console cable
(included) 115200bps, 8, N, 1.
Switch Properties
Switching Latency 7 μs
Switching Bandwidth 52 Gbps
Max. VLANs Available 256
IGMP Multicast Groups 128 for each VLAN
Port Rate Limiting User Defined
MAC Table 8000 MAC addresses available
Priority Queues 4
Processing Store-and-Forward
Jumbo Frame Up to 9.6K Bytes
Features
Security Features Device Binding Security
Enable/Disable Ports, MAC based port security
Port-Based Network Access Control: 802.1x
VLAN (802.1Q): To segregate and secure network traffic
Radius Centralized Password Management
SNMPv3 Encrypted Authentication and Access Security
HTTPS/SSH enhanced network security
IP-Based Bandwidth Management
Application-Based QoS Management
TOS/Diffserv Supported
VLAN VLAN Tagging and GVRP Supported
DHCP Server / Client support
Network Redundancy C-Ring
Multiple Redundant Network Rings
RSTP/STP/MSTP
Power
Operating Voltage Range 100 to 240 VAC, 50-60 Hz (internal power supply).
Power Consumption, Typical 36 watts
Current Protection Overload Current Protected
Electrical & Mechanical
Indicating LEDs Power Ring Master C-Ring (Ring) Fault
RJ-45 Port SFP Port
Enclosure 1-RU high, 19-inch rack-mountable
Size (L×W×H) 13.46 × 16.97 × 1.73 in (34.2 × 43.1 × 4.4 cm)
Shipping Weight <13 lbs./6 kg
Environmental
MTBF >100,000 hours
Operating Temp 0˚ C to +50˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 5% to 95% (non-condensing)²
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) Class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS)
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Mechanical Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Ethernet Standards Supported
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
ORDERING INFORMATION
Part Number Description
CWGE26FX2TX24MS (22) 10/100/1000 BASE-T(X) + (2) Gigabit Combo Ports + (2) 100/1000 BASE-FX
Included Accessories Rack-mount installation kit, Console cable, and AC Power cable
Options [2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
User selection of ComNet SFP (Extra charge, see SFP Modules data sheet for product numbers and compatibility before ordering)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is
recommended.
[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
A
GENCY COMPLIANCE