Data Sheet

CWGE26FX2TX24MSPOE
(22) 10/100/1000 BASE-T(X) + (2) Gigabit Combo Ports +
(2) 100/1000 BASE-FX with Power over Ethernet (PoE+)
SPECIFICATIONS
Ethernet Ports
RJ-45 Ports (22) 10/100/1000Base-TX,
with Auto MDI/MDIX with PSE
Combo Ports (2) 10/100/1000Base-Tx,
with Auto MDI/MDIX with PSE
or (2) 100/1000Base-Fx SFP
SFP
1
Ports (2) 100/1000Base-FX
Ethernet Standards Supported
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3at for PoE up to 30 watts per port with a total power budget of 400 watts
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
Switch Properties
Switching Latency 7 μs
Switching Bandwidth 52 Gbps
Max. VLANs Available 256
IGMP Multicast Groups 128 for each VLAN
Port Rate Limiting User Defined
MAC Table 8000 MAC addresses available
Priority Queues 4
Processing Store-and-Forward
Jumbo Frame Up to 9.6K Bytes
Security Features
Device Binding Security
Enable/Disable Ports, MAC based port security
Port-Based Network Access Control: 802.1x
VLAN (802.1Q): To segregate and secure network traffic
Radius Centralized Password Management
SNMPv3 Encrypted Authentication and Access Security
HTTPS/SSH enhanced network security
Software Features
STP/RSTP/MSTP (IEEE 802.1D/w/s)
C-Ring Redundant Ring: Recovery time <30ms over 250 units in a network
TOS/Diffserv Supported
Quality of Service (802.1p) for Real-Time Traffic
VLAN (802.1Q) with VLAN Tagging and GVRP Supported
IGMP Snooping for Multicast Filtering
Port Configuration, Status, Statistics, Monitoring, & Security
DHCP Server / Client support
IP-Based Bandwidth Management
Application-Based QoS Management
Network Redundancy
C-Ring
Multiple Redundant Network Rings
RSTP/STP/MSTP
RS-232 Serial Console Port
RS-232 in DB9 connector with console cable (included) 115200bps, 8, N, 1.
Indicating LEDs
Power For AC operating power
Ring Master Indicates switch is operating in the C-Ring Master
mode
C-Ring (Ring) Indicates switch is operating in the C-Ring mode.
A flashing LED in this mode indicates the network
ring has broken or is faulty.
Fault A Fault condition exists in the switch
PoE PSE (Power Sourcing Equipment) power output
RJ-45 Port Bi-color LED indicates 1000 Mbps
or 10/100 Mbps port/link activity
SFP Port Port/link activity
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) Class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS)
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Mechanical Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651.
Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
5 YEAR WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427