Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 122
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
IP
IP>
Configuration
DHCP [enable|disable]
Setup [<ip_addr>] [<ip_mask>] [<ip_router>] [<vid>]
Ping <ip_addr_string> [<ping_length>]
SNTP [<ip_addr_string>]
Port
Port>
Configuration [<port_list>] [up|down]
State [<port_list>] [enable|disable]
Mode [<port_list>] [auto|10hdx|10fdx|100hdx|100fdx|1000fdx|sfp_auto_ams]
Flow Control [<port_list>] [enable|disable]
MaxFrame [<port_list>] [<max_frame>]
Power [<port_list>] [enable|disable|actiphy|dynamic]
Excessive [<port_list>] [discard|restart]
Statistics [<port_list>] [<command>] [up|down]
VeriPHY [<port_list>]
SFP [<port_list>]
MAC
MAC>
Configuration [<port_list>]
Add <mac_addr> <port_list> [<vid>]
Delete <mac_addr> [<vid>]
Lookup <mac_addr> [<vid>]
Agetime [<age_time>]
Learning [<port_list>] [auto|disable|secure]
Dump [<mac_max>] [<mac_addr>] [<vid>]
Statistics [<port_list>]
Flush