Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 124
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
Security Switch
Security/switch>
Password <password>
Auth Authentication
SSH Secure Shell
HTTPS Hypertext Transfer Protocol over Secure Socket Layer
RMON Remote Network Monitoring
Security Switch Authentication
Security/switch/auth>
Configuration
Method [console|telnet|ssh|web] [none|local|radius] [enable|disable]
Security Switch SSH
Security/switch/ssh>
Configuration
Mode [enable|disable]
Security Switch HTTPS
Security/switch/ssh>
Configuration
Mode [enable|disable]
Security Switch RMON
Security/switch/rmon>
Statistics Add <stats_id> <data_source>
Statistics Delete <stats_id>
Statistics Lookup [<stats_id>]
History Add <history_id> <data_source> [<interval>] [<buckets>]
History Delete <history_id>
History Lookup [<history_id>]
Alarm Add <alarm_id> <interval> <alarm_variable> [absolute|delta]<rising_
threshold> <rising_event_index> <falling_threshold> <falling_event_index>
[rising|falling|both]
Alarm Delete <alarm_id>
Alarm Lookup [<alarm_id>]