Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 128
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
LACP
LACP>
Configuration [<port_list>]
Mode [<port_list>] [enable|disable]
Key [<port_list>] [<key>]
Role [<port_list>] [active|passive]
Status [<port_list>]
Statistics [<port_list>] [clear]
LLDP
LLDP>
Configuration [<port_list>]
Mode [<port_list>] [enable|disable]
Statistics [<port_list>] [clear]
Info [<port_list>]
PoE
PoE>
Configuration [<port_list>]
Mode [<port_list>] [disabled|poe|poe+]
Priority [<port_list>] [low|high|critical]
Mgmt_mode [class_con|class_res|al_con|al_res|lldp_res|lldp_con]
Maximum_Power [<port_list>] [<port_power>]
Status
Primary_Supply [<supply_power>]
Schedule Configuration [<port_list>]
Schedule Mode [<port_list>] [enable|disable]
Schedule Port [<port_list>] [enable|disable] [sun|mon|tue|wed|thu|fri|sat]
[<hour>]
AutoPing Configuration [<port_list>]
AutoPing Log [clear]
AutoPing Mode [enable|disable]
AutoPing Port [<port>] [<ip_addr>] [<ping_interval>] [<retry>] [nothing|restart-
forever|restart-once|power-on|power-off] [<reboot>]
PoE>