Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 2
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
Contents
About This Guide 5
Related Documentation 5
About ComNet 5
Website 5
Support 5
Safety 5
Overview 6
Introduction 6
Software Features 7
Hardware Features 8
Hardware Overview 9
Front Panel 9
Rear Panel 10
Rack mount kit assembly 10
Ethernet Cables 11
1000/100BASE-TX/10BASE-T Pin Assignments 11
SFP 13
Console Cable 13
WEB Management 15
Configuration by Web Browser 15
About Web-based Management 15
Basic Setting 18
System Information 18
Admin & Password 19
Auth Method 20
IP Setting 21
HTTPS 22
SSH 22
LLDP 23
Backup/Restore Configuration 27
Firmware Update 27