Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 51
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
CWGE26FX2TX24MSPOE
Unaware
Packet
No VLAN
Packet
No VLAN
Packet
VID: 5
TPID: 8100
Packet
VID: 5
TPID: 8100
VID: PVID
TPID: 8100
Packet
VID: 5
TPID: 88A8
Packet
Discarded
QinQ
S-custom-port is used for user
defined TPID. If the Ethertype
for Custom S-ports is configured
to 8123, the outgoing packet
will bring a TPID 8123 tag.
CWGE26FX2TX24MSPOE
S-custom-port
Packet
No VLAN
Packet
No VLAN
Packet
VID: 5
TPID: 8100
Packet
VID: 5
TPID: 88A8
Packet
VID: 5
TPID: 8123
Packet
Discarded