Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 53
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
VLAN 1Q Trunk mode
P7 P7
P2 P2P1 P1
P8
P8
CWGE26FX2TX24MSPOE
Switch A
CWGE26FX2TX24MSPOE
Switch B
CWGE26FX2TX24MSPOE
Switch C
VLAN Trunk
10,20
VLAN 10 VLAN 10
VLAN 20 VLAN 20
VLAN Trunk
10,20
In the topology above, for Switch B,
Port 1 = VLAN 1Qtrunk mode = tagged 10,20
Port 2 = VLAN 1Qtrunk mode = tagged 10,20
Configure the VLAN for Switch B as shown