Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 7
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
Software Features
» C-Ring (recovery time < 30ms over 250 units of connection)
» MSTP (RSTP/STP compatible) for Ethernet Redundancy
» 24 ports PSE fully compliant with IEEE802.3at standard, providing up to 30 Watts per port
» IEEE 1588v2 clock synchronization
» Provides HTTPS/SSH protocol to enhance network security
» IP-based bandwidth management
» application-based QoS management
» Device Binding security function
» IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
» SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
» ACL, TACACS+ and 802.1x User Authentication for security
» 9.6K Bytes Jumbo Frame
» SFP ports support DDM function
» Multiple notification for warning of unexpected event
» Web-based Telnet, Console (CLI), and Windows utility (eConsole) configuration
» LLDP Protocol
» 19 inch rack mountable design