Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 9
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
Hardware Overview
Front Panel
The following table describes the labels on the CWGE26FX2TX24MSPOE
Port Description
Gigabit SFP ports 2 x 100/1000Base-X on SFP port
Combo Ports 2 x 100/1000Base-X SFP & 10/100/1000Base-T(X) Combo
Gigabit Ethernet Ports 22 x 10/100/1000Base–T(X)
Console Use RS-232 with DB-9 connecter to manage switch.
28
75
6
1 3 4
CWGE26FX2TX24MSPOE
1. Console port (DB-9 Female connector)
2. 10/100/1000Base-T(X) Gigabit Ethernet ports
3. LED for Odd Numbered Ethernet ports Link/Act status
4. LED for Even Numbered Ethernet ports Link/Act status
5. 100/1000Base-X SFP & 10/100/1000Base–T(X) Combo
6. PoE Status LED
7. 100/1000Base-X SFP Port
8. Front panel LED Status:
» LED for PWR The LED lights on when the power module is activated.
» LED for Fault When the fault occurs, the amber LED will be light on.
» LED for R.M. (Ring master). Indicates that the switch is the Master of the Ring.
» LED for Ring Indicates that the C-Ring is activated.