Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 96
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
Last ID The user name (supplicant identity) carried in the most recently received Response
Identity EAPOL frame for EAPOL-based authentication, and the source MAC address
from the most recently received frame from a new client for MAC-based authentication.
This page provides detailed IEEE 802.1X statistics for a specific switch port running port-based
authentication. For MAC-based ports, it shows selected backend server (RADIUS Authentication
Server) statistics, only. Use the port select box to select which port details to be displayed.
Label Description
Admin State The port’s current administrative state. Refer to NAS Admin State for a description of
possible values.
Port State The current state of the port. Refer to NAS Port State for a description of the individual
states.
EAPOL Counters These supplicant frame counters are available for the following administrative states:
• Force Authorized
• Force Unauthorized
• 802.1X