System information

54
IP Configuration
The switch is a network device that needs to be assigned an IP address to be identified on
the network. Users have to decide a means of assigning an IP address to the switch.
 DHCP Client: Enable or disable the DHCP client function. When DHCP client
function is enabled, the switch will be assigned an IP address from the network DHCP
server. The default IP address will be replaced by the assigned IP address on DHCP
server. After the user clicks Apply, a popup dialog shows up to inform the user that
when the DHCP client is enabled, the current IP will lose and user should find the new
IP on the DHCP server.
 IP Address: Assign the IP address that the network is using. If DHCP client function
is enabled, this switch is configured as a DHCP client. The network DHCP server will
assign the IP address to the switch and display it in this column. The default IP is
192.168.10.1 or the user has to assign an IP address manually when DHCP Client is
disabled.
 Subnet Mask: Assign the subnet mask to the IP address. If DHCP client function is
disabled, the user has to assign the subnet mask in this column field.
 Gateway: Assign the network gateway for the switch. If DHCP client function is
disabled, the user has to assign the gateway in this column field. The default gateway
is 192.168.10.254.
 DNS1: Assign the primary DNS IP address.
 DNS2: Assign the secondary DNS IP address.
 And then, click
.