Data Sheet

5 YEAR WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FEATURES
› Commercial Grade
› 10/100/1000 Mbps Ethernet
• 10/100/1000 BASE-T(X) electrical port
• 1000 BASE-FX optical port
› Electrical port supports Auto-Negotiation for 10, 100, or
1000Mbps, full duplex or half duplex data.
› Optical port supports 1000 Mbps full duplex data
› Automatic MDI/MDI-X crossover
› Supports Jumbo Frames up to 2K Bytes in switch converter
mode or 16K Bytes in pure converter mode
› Available with pre-installed SFP modules providing
1000BASE-SX or 1000BASE-LX operation or with an empty
SFP module slot for maximum flexibility
› Link Fault Pass-through for remote end fault detection
› Transparent to data encoding/compatible with major data
protocols
› Ambient operating temperature range: 0º – 50ºC
› Designed for stand-alone or rack mount installation (with
sold-separately ComNet CWCHASSIS rack).
› No in-field optical adjustments required
› LED Indicators
› IEEE 802.3 compliant
› 5 Year Warranty
APPLICATIONS
› 10/100/1000 Mbps Ethernet Media Converter
› High Speed Computer Links
The ComNet CWGE2SFP Ethernet media converter series are one-channel Ethernet
electrical to optical media converters. These auto-negotiating devices accept a
10/100/1000 Mbps electrical input and convert this to a 1000 Mbps optical output.
These devices use either one or two optical fibers, depending upon the selection of
either included or sold-separately SFP* optical module. These devices can be used in
stand-alone mode or can be installed within the ComNet CWCHASSIS 19 inch rack.
CWGE2SFP Series
Commercial Grade 10/100/1000BASE-T(X) to
1000BASE-FX Gigabit Ethernet Media Converter
1 CHINCLUDED FLEXIBILITY CONVERTER
* Small Form-Factor Pluggable Module. Sold separately.